ACCESSORIES |
|
|
Pypes is proud to release the first in a series of oem hangers that have OEM appearance but upgraded 304 Stainless Steel construction.
These hangers are perfect for todays performance vehicles that utilize larger diameter exhaust pipe while maintaining that oem appearance.
Will be the last hangers the car will ever need.
Fits 2.0", 2.25", 2.5” and 3” pipes.
|
|
| Part# |
Description |
|
|
HGH10
|
1964-72 A-body Stainless Tailpipe Hangers (pr)
|
|
HGH11
|
1964-72 Chevelle Stainless Tailpipe Hangers (pr)
|
|
HVH30
|
1970-81 F-body Stainless Tailpipe Hangers (pr)
|
|
|
HGH13
|
1964-72 A-body Stainless Muffler Hangers (pr)
|
Pypes is proud to release the first in a series of oem style hangers that have OEM appearance but upgraded 304 Stainless Steel construction. These hangers are recommended with any aftermarket cat-back exhaust system.
These hangers are perfect for todays performance vehicles that utilize larger diameter exhaust pipe while maintaining that oem appearance.
Will be the last hangers the car will ever need.
|
|
| Part# |
Description |
|
|
TPHV6
|
1999-2004 Mustang Stainless Tailpipe Hangers (pr)
|
|
MHV6
|
1986-2004 Mustang Stainless Muffler Hangers (pr)
|
|
HFH30
|
1999-04 Mustang Stainless Hanger Kit (includes TPHV6 & MHV6)
|
Pypes is continuing to release great quality oem style hangers that have OEM appearance but upgraded to 304 Stainless Steel construction. These hangers are a reproduction of the 2005-08 Mustang Muffler Hanger.
These hangers are perfect for todays performance vehicles that utilize larger diameter exhaust pipe while maintaining that oem appearance.
The 304 Stainless steel construction makes these the last muffler hangers your 2005-07 Mustang will ever need.
| Part# |
Description |
|
|
HFM60
|
2005-08 Mustang 304 Stainless Muffler Hangers (ea)
|
|
This kit comes with 2-electric exhaust cutouts, wiring harness to control both cutouts w/ one switch, stainless steel mounting hardware, extra thick gaskets, and our LIFETIME LIMITED WARRANTY. These cutouts are manufactured to the highest quality standards with only the highest quality materials. See the Kit Picture.
See how our Cutouts compare to the competition.
Cutout Assembly
Housing is manufactured from 6061-T6 billet aluminum and machined down to .600" thick to ensure flatness
.125" aluminum Butterfly
Double sealed butterfly to ensure no leaks
"Bull Nose" butterfly seals in matching "Bull Nose" seat.
High temp o-ring to ensure complete seal
Our motor units are gear reduced to allow positive seal
Housing is CNC machined to insure positive seal to "Y" pipe
Stainless steel shafts
Stainless steel coupler
Stainless steel hardware
Proven dependable gear reduction drive motor
Extra thick gasket which seals better as wells as helps insulate against heat
Slotted mounting bolt holes for flexibility in mounting position
High Quality stainless steel mounting bolts and nuts
Built In Thermal Protection device to protect motor from overload
Harness
Weather tight connectors on all outside connections
5 amp quick blow fuse built into harness
16 ga. Heavy Duty heat resistant wire
Labeled positive and negative leads for ease of installation
These 3" electric cutouts will fit any 2.5" or 3" product with a standard 3" flange. This includes the following Pypes products:
- XVX10 - 2.5" X-change crossover (409 SS)
- XVX10S - 2.5" X-change crossover (304 polished SS)
- XVX13 - 3" X-change crossover (409 SS)
- XVX13S - 3" X-change crossover (304 polished SS)
- YVX10S - 2.5" Y cutout (304 SS)
- YVX13S - 3" Y cutout (304 SS)
- XVX10F - 2.5" X-pipe cutout leg (409 SS)
- XVX13F - 3" X-pipe cutout leg (409 SS)
| Part # |
Description |
|
|
HVE10
|
3" Dual Electric Exhaust Cutout Kit
|
|
HVE10K
|
Dual Electric Cutout & Y-pipe Kit (for 2.5" exhaust)
|
|
HVE11
|
3" Electric Exhaust Cutout (single)
|
|
HVE13K
|
Single Electric Cutout & Y-pipe Kit (for 3" exhaust)
|
|
These 304 polished stainless tig welded Y Dumps are perfect for Single exhaust cars like late model trucks and 3rd Gen F-body cars. Add Pypes HVE12 or most other brands of electric cutouts for the ultimate quick change from closed to open exhaust! All you need is about a 15” of straight pipe of your exhaust cut out and this added in.
| 304 Polished Stainless |
Description |
|
|
YVX10S
|
2.5" Y Exhaust Cutout
|
|
YVX13S
|
3" Y Exhaust Cutout
|
|
This extension adds 18" to your o2 sensor cable, to allow you to install an aftermarket X-pipe on a 1996-2004 Mustang.
| Part# |
Description |
|
|
HVE22
|
1996-2004 Mustang 18" o2 Sensor Extension
|
|
Our, USA made, patented stainless band clamps are great for applications that require frequent un-installs. They are also the perfect compliment to our fully polished ceramic exhaust systems.
|
If you need an extra piece of pipe to finish a custom fit, look no further. All of these pipes are 304 stainless steel and mandrel bent to the designated angle.
|
This unique kit is made for "Builder's" who want create a custom exhaust for their vehicle(s). These kits include (4)30/180 bends, (2)45/90 bends, 16' of straight pipe (in 4' pieces), (2)3" collector flanges, (4) sets of universal hangers and (1)set of sheet metal screws. All pipes are 304 stainless steel and all hardware is 409 stainless steel.
| 309 Polished Stainless |
Description |
|
|
SVV10
|
2.5” Universal "Builder's" System Kit
|
|
SVV13
|
3” Universal "Builder's" System Kit
|
|
| Part# |
Description |
|
|
HVF10
|
2.5" Collector Flange
|
|
HVG10
|
2.5" Collector Flange Gasket
|
|
|
|
HVF13
|
3" Collector Flange
|
|
HVG13
|
3" Collector Flange Gasket
|
|
|
|
HVF16
|
3.5" Collector Flange
|
|
HVG16
|
3.5" Collector Flange Gasket
|
|
Make quality customer collector reducers by combining two mandrel bends with two flanges for special applications like Shorty style headers!
- Choose the mandrel bend that approximates the angle you need.
- Choose a flange that matches your headers.
- Make a fine tune adjustment cut on the header side of the mandrel bends, if necessary.
- Weld the flange to the cut end of the mandrel bend.
|
Our welded, extended length reducers (12") eliminate unnecessary seams, clamps and extra work. They are now Polished 304 Stainless Steel Construction.
| Polished Stainless |
Description |
|
|
PVR10S
|
3" header flange to 3" pipe reducers (pr)
|
|
PVR13S
|
3.5" header flange to 3" pipe reducers (pr)
|
|
PVR16S
|
3" header flange to 2.5" pipe reducers (pr)
|
|
PVR19S
|
3.5" header flange to 2.5" pipe reducers (pr)
|
|
These kits include 8 stainless band clamps and 4 stainless U clamps.
| Part # |
Description |
|
|
HVC30
|
2.5" Stainless Hardware Kit
|
|
HVC33
|
3" Stainless Hardware Kit
|
|
These flow tubes are specially designed to connect crossovers to mufflers. They feature a ball joint for leak free and easy installation.
The flanges are sold separately.
| 409 Stainless |
Polished 304 Stainless |
Description |
|
|
PFF10
|
PFF10S
|
2.5" Mustang Flow Tubes
|
|
PFF13
|
|
2.5" Mustang Flow Tube Flanges
|
|
This powdercoated 1/8" steel body brace will replace the factory brace and allow you to install an RPE631F X-crossover assembly. This brace is much stronger than other body brace "spacers" currently available and doesn't require you to have or alter an original brace.
| Part # |
Description |
|
|
RPE631FB
|
1967-69 F-body Convertible Body Brace
|
|
| Part# |
Description |
|
|
PYPESTL
|
Pypes T-shirt - Large size
|
|
PYPESTXL
|
Pypes T-shirt - X Large size
|
|
Pypes has designed these baseball cap style hats for our customers. They are adjustable caps with a Pypes Logo embroidered on the front and "Pypes Performance Exhaust" embroidered in yellow on the back. They also feature "Pypes Performance Exhaust" stitched on the edge of the brim.
| Part# |
Description |
|
|
PYPESHAT
|
Pypes Logo Baseball Cap
|
|
This sheet of decals comes included with every exhaust system we sell. But sometimes customers want extra decals so they can decorate their garage, cooler, power tools or neighbor's dog. There are 3 decals on each sheet, (1) 9" x 3.25" and (2) 4.5" x 1.75". They are made of weather and fade resistant vinyl. Made in the USA.
|
It's occured to us, at Pypes Exhaust, that once you've installed your Pypes Exhaust on your vehicle, you are reaping the benefits of added performance and your ride is sounding as good or better than you've ever imagined it could, there are not enough ways to advertise to everyone that the exhaust of your dreams came from the exhaust company known for it's quality and performance. In an effort to fill some of that need you may be feeling, we've designed these Pypes Equipped Emblems. They are ideal for your fender, quarter panel, trunk lid, dash, toolbox, workbench, beer fridge or forehead.
Look for these to become a part of the Pypes Bonus Pack in the near future.
| Part# |
Description |
|
|
PYPESEMBLEM
|
Pypes Equipped Emblem - Specify Black or Red
|
|
Over the years we've gotten requests from satisfied Pypes Exhaust customers for a Pypes Exhaust Parch they can attach to their favorite apparel and accessories. And we hate to disappoint our customers. This patch measures about 4.5" wide and 1.5" high. These patches can be added to any apparel, blanket, upholstery, cloth seat or backpack where you want to display you Pypes pride.
| Part# |
Description |
|
|
PYPESPATCH
|
Pypes Exhaust Embroidered Patch
|
|
|
FOR TECH ADVICE:
READ OUR EXHAUST TECH FORUM
or
Call: (800) 421-3890
or
E-mail
with your application for Expert Sales Advice.
E-mail
with your application for Expert Technical Advice.
|
